	Company Profile
	Products
	Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Plastic profiled housings on a standard electric DIN rail
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

HLG-100W series

Full function adjustable waterproof power supply

Features:
- Universal AC input
- Built-in power factor correction
- Protections:short circuit/over load/over voltage/over temp
- Cooling by free air convection
- OCP point adjustable through output cable or internal potentiometer
- IP67/65 design for indoor or outdoor installations
- Suitble for LED lighting and moving sign applications
- 3 Year warranty

Model		HLG-100-12	HLG-100-20	HLG-100-24	HLG-100-36	HLG-100-48
output	DC voltage	12V	20V	24V	36V	48V
	Constant current region	6~12V	10~20V	12~24V	18~36V	24~48V
	Rated current	5A	4.8A	4A	2.65A	2A
	Rated power	60W	96W	96W	95.4W	96W
	Ripple&noise	150mvp-p	150mvp-p	150mvp-p	200mvp-p	200mvp-p
	Voltage ADJ range	10.8~13V	17~22V	22~27V	33~40V	43~53V
	Current ADJ range	Can be adjusted by internal potentiometer or through output cable
		3~5A	3~4.8A	2.5~4A	1.7~2.65A	1.2~2A
input	Voltage range	90~264VAC, 47~63HZ , 127~370VDC
	AC current	1.2A/115VAC, 0.55A/230VAC
	Power factor	PF>0.95/230VAC,PF>0.98/115VAC Start overload protection
	Efficiency	90%	93%	93%	93%	93%
	Inrush current	Cold start current 35A/115VAC, 75A/230VAC
	Leakage current	< 0.75mA/240VAC
protection	Over current	95%~108%
		protection type :Constant current limiting, auto-recovery after fault condition is removed
	Short circuit	Hiccup mode, recovers automatically after fault condition is remove
	Over voltage	14~17V	23~27V	28~34V	41~46V	54~60V
		protection type:Shut down o/p voltage re-power on to recover
	Over temperature	100°C±10°C（RTH2）
		protection type:Shut down o/p voltage re-power on to recover
environment	Working temp, humidity	-20°C~+60, 20%~90%RH
	Storage temp, humidity	-40°C~+85, 10%~95%RH non-condensing
	Withstand vibration	10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety	Withstand voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
fit standard	Safety standard	Fit UL1310 CLASS2,TUV EN61347-1,EN61347-2-13, IP65approved
	EMC standard	Fit EN55015, EN61000-3-2 ClassC(>60%load):EN61000-3-3
others	Dimension	2236939mm (LWH)
	Weight/packing	1kg/20pcs/21kg/0.03m³/1.07CUFT
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.