Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Plastic profiled housings on a standard electric DIN rail
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Capacitors / Electrolytic /
Series GF
+105°C, High Ripple Current, Special Low Impedance
 |
FEATURES
1. Low impedance at 100kHz.
2. Enabled high ripple current by a reduction of ESR at high frequency range.
3. Load life: 105°C 2000 hours.
4. Suitable for P4 mother board.
 |
CASE SIZE TABLE
| ØD |
8(L<20) |
8(L≥20) |
10 |
12,5 |
| F |
3,5 |
5,0 |
| Ød |
0,5 |
0,6 |
| α |
(L<20) 1,5 (L≥20) 2,0 |
| β |
(D<20) 0,5 (D≥20) 1,0 |
SPECIFICATIONS
| Item |
Performance Characteristics |
| Operating Temperature Range |
-25 to +105°C |
| Rated Working Voltage Range |
6,3 to 16V |
| Capacitance Tolerance |
±20% (120Hz, +20°C) |
| Leakage Current |
I ≤ 0,03 CV or 3μA (after 2 minutes)
C = Nominal Capacitance (μF)
V = Rated Voltage (V)
I = Leakage Current (μA) |
| tan δ (120Hz, +20°C) |
| Working Voltage (V) |
6,3 |
10 |
16 |
| tan δ (max) |
0,22 |
0,19 |
0,16 |
When nominal capacitance is over 1000μF, tan δ shall be added 0,02 to the listed value increase with of every 1000μF |
| Low Temperature Characteristics |
Impedance ratio max. at 120Hz
| Working Voltage (V) |
6,3 |
10 |
16 |
| Z-25°C / Z+20°C |
2 |
2 |
2 |
|
| Load Life |
After applying rated voltage with max ripple current for 2000hrs at 105°C, the capacitors shall meet the following requirements
Capacitance Change: Within ±25% of the initial value
Dissipation Factor: Not more than 200% of the specified value
Leakage Current: Not more than the specified value |
| Others |
JIS C - 5101 (IEC 60384) |
STANDARD RATINGS
| Voltage (Code) |
6,3V (0J) |
10V (1A) |
16V (1C) |
| Cap, (μF) |
Code |
Case Size
ØDxL (mm) |
Impedance |
Ripple
Current |
Case Size
ØDxL (mm) |
Impedance |
Ripple
Current |
Case Size
ØDxL (mm) |
Impedance |
Ripple
Current |
| 470 |
477 |
|
|
|
|
|
|
8x12 |
43 |
1036 |
| 680 |
687 |
|
|
|
8x12 |
43 |
1036 |
8x16 |
34 |
1355 |
| |
|
|
10x12,5 |
31 |
1400 |
| 820 |
827 |
8x12 |
43 |
1036 |
|
|
|
|
|
|
| 1000 |
108 |
|
|
|
8x16 |
34 |
1355 |
8x20 |
25 |
1700 |
| |
|
|
10x12,5 |
31 |
1400 |
10x16 |
23 |
1818 |
| 1200 |
128 |
8x16 |
34 |
1355 |
|
|
|
|
|
|
| 8x20 |
25 |
1700 |
|
|
|
|
|
|
| 1500 |
158 |
8x20 |
25 |
1700 |
8x20 |
25 |
1700 |
10x20 |
16 |
2318 |
| 10x12,5 |
31 |
1400 |
10x16 |
23 |
1818 |
| 1800 |
188 |
10x16 |
23 |
1818 |
10x20 |
16 |
2318 |
10x25 |
14 |
2545 |
| 2200 |
228 |
10x20 |
16 |
2318 |
10x25 |
14 |
2545 |
12,5x25 |
13 |
2545 |
| 3300 |
338 |
10x25 |
14 |
2545 |
|
|
|
|
|
|
Maximum Allowable Ripple Current (mA rms) at 105°C 100Hz
Maximum Impedance (Ω) at 20°C 100kHz |
RIPPLE CURRENT MULTIPLIER
Frequency Coefficient (Hz)
| Cap (μF) |
120 |
1k |
10k |
100k |
| 470-3300 |
0,50 |
0,80 |
0,90 |
1,00 |
TEMPERATURE CHARACTERISTICS
FREQUENCY CHARACTERISTICS
ENDURANCE
|
|
